Pilot Jet Mikuni Carb Jetting Chart

Pilot Jet Mikuni Carb Jetting Chart – I just pulled the stock cv40 off and replaced it with a mikuni hsr42 carb. 1) the “long (or large) hex” style main jet is known as the “amal”. Be sure to check the chart carefully and use the appropriate drill bit size. Valves set, new 12v coils, boyer, timing set.

The three jets (located between the floats) are: It helps to have an example of each style of jet at hand when reading this explanation. 10, 12.5, 15, 17.5, 20, 22.5, 25, 27.5, 30, 32.5, 35, 37.5, 40, 45, 50, 55, 60, 65, 70, 75, 80, 85. Chart throttle position circuit adjustments index jetting components note:

Pilot Jet Mikuni Carb Jetting Chart

Mikuni bs30/96 pilot jet £5.20 each. Available in the following sizes. This chart also provide the various size ranges available for each style jet.

I’m running a 230 main, needle on 3. Above, you are looking at the bottom of the carb with the bowl removed. I am trying to sort out the jetting on my 36mm mikuni pumper carb.

When i back off the throttle, i get a fair amount of popping. My pilot jet is a 35,. I upped the pilot jet from 15.0 to.

You may need to adjust the main jet, pilot jet and/or clip position on the needle for your motorcycle to run at peak efficiency. I have to run a really lean pilot jet to get it to start properly and consistently throughout. To select a jet type “hover” over jets on the menu to the left of the screen and click on your relevant selection from the drop down list.

Pilot Jet Mikuni Carb Jetting Chart